New from BookNet Canada for 2024: BNC BiblioShare - Tech Forum 2024
product_data_sheet0900aecd807197da
1. Data Sheet
Cisco D9032 Encoder
Product Overview
In the broadcast and broadband world, optimizing bandwidth in your distribution channels
is of utmost importance. The Encoder Model D9032 is designed to deliver high-quality
MPEG-2 video while using very limited bandwidth. Used in either constant or variable bit
rate, or an IP-based, closed-loop statistical multiplex mode, the encoder delivers clean,
sharp pictures.
The D9032 Encoder includes PreSightPlus technology - a new DSP-based pre-
processing architecture that carries out multiple pre-processing steps to help optimize the
encoding process. PreSightPlus algorithms perform three functions, addressing different
issues in a compression system:
● Adaptive and motion compensated noise reduction
● Auto-concatenation enabling the encoder to lock the encoding GOP to that of the preceding
encoder
● Pre-analysis for optimal dual-pass encoding
PreSightPlus pre-analysis combined with our advanced IP-based statistical multiplexing
control is an industry leading solution for bandwidth-saving encoding using closed-loop
statistical multiplexing technology with support for up to 60 encoders spread across 20
pools, employing either MPEG-2 or AVC encoding technology. The dual-pass
architecture of the encoder provides detailed information to the statistical multiplex
controller, allowing it to make better bit rate allocation decisions. D9032 Encoders can be
geographically distributed using Regional Statmux.
Control of the encoder is supported via a front panel interface, an on-board web
application, an optional ROSA® driver, and an open communication protocol (SNMP).
Transport output is provided via ASI outputs as well as through an IP (100Base-T)
streaming output.
The extensive features allow the D9032 Encoder to address a wide range of applications
such as contribution, cable headends, DTH or DVB-T play-outs and IP headends.
Figure 1. Cisco D9032 Encoder
Page 1 of 7
2. Data Sheet
Features
● Dual-pass architecture through PreSightPlus pre-analysis and 3:2 pull-down inversion
● Web-based GUI and SNMP management interface for interfacing to any Management
System
● 1 RU, low-power consumption, stackable
● Four audio channels as either embedded, analog or digital audio input
● Upgradable to H.264 video and HE-AAC audio
● Extensive VBI support according to DVB and SCTE
● Stand-alone variable bit rate
● Integrated Frame synchronizer with internal and external reference
● PCR synchronization on dedicated local area network
● BISS 1/E scrambling
Optional Features
● Support for IP-based MPEG-2 and AVC Statistical Multiplexing controlled by our DCM
(Digital Content Manager)
● Adaptive motion compensated temporal filtering (in PreSightPlus noise reduction option)
● DPI via SCTE 35 support triggered by either contact closure or a cue tone input (i.e., DTMF
tones)
● 4:2:2 P@ML video compression
● ClearSight Composite video input and SDI video input
● Four additional audio channels and Internal Dolby® Digital (AC-3) encoding
● Auto-concatenation of previously encoded picture material for improvement of overall
picture quality
● ROSA driver
● DC power supply
Page 2 of 7
3. Data Sheet
Specifications
Table 1. Product Specifications, Release Version 3.2
Feature Description
Video
Standard Composite input
Systems PAL (B, D, G, H, I, K, M and N) and NTSC M
Video level 0 dBV nominal
Frequency response ±0.65 dB; 0.5-5.0 MHz
Differential gain/phase ≤ 3% / ≤ 3°
Noise < -55 dB RMS weighted relative to 0.7 V
Impedance 75 Ω unbalanced
Return loss > 35 dB, 10 Hz to 5.5 MHz
Connector BNC
Aspect Ratio 4:3, 16:9
1
Composite input with ClearSight
Systems PAL (B, D, G, H, I, K, M, N, and (N)) and NTSC M
Video level 0 dBV nominal
Frequency response ± 0.2 dB, 10 Hz to 5.75 MHz
Differential gain/phase <1%pp / <1°pp
Noise <-58 dB
Impedance 75 Ω unbalanced
Return loss > 35 dB, 10 Hz to 5.5 MHz
Connector BNC
Aspect Ratio 4:3, 16:9 or auto-detect on WSS
SDI input
Systems 525/29.97 Hz and 625/25 Hz, auto detection of the SDI input signal
Impedance 75 Ω unbalanced
Input level 800 mVpp nominal
Return loss ≥ 15 dB, 5 to 270 MHz
Connector BNC
Bit rate 270 Mbit/s ± 10 ppm
Jitter acceptance ≥ 25% of a clock period
Aspect Ratio 4:3, 16:9 or auto-detect on VII or WSS
Active Format Descriptor (AFD) Auto-detect on VII or WSS
Audio
Inputs Analog, digital AES/EBU or AES-3ID and embedded. AES/EBU is not
supported for channels 1 and 2
Connector BNC and terminal block
Number of channels Up to four stereo pairs or eight mono channels
Audio/Video synchronization < 1 ms without frame synchronizer
< ± 20 ms with frame synchronizer
Analog Audio
Impedance 600 Ω or >20 kΩ balanced
CMRR > 50 dB, 1 kHz
Only ClearSight configurations with p/n 4013873xyz support PAL M, N and (N).
1
Page 3 of 7
4. Data Sheet
Feature Description
Clipping level -6 to +24 dBu, 500 mdBu increments
AES-3ID Digital Audio Ch 1+2 (On board)
Impedance 75 Ω single-ended
AES-3ID Digital Audio Ch 1+2 (On board) & Ch 3+4 (Optional)
Return loss >15 dB, 0.1 to 6.0 MHz
Input level 0.5 to 2 Vpp nominal
Sample rate 32 kHz, 44.1 kHz and 48 kHz
AES/EBU Digital Audio Ch 3+4 (Options)
Impedance 110 Ω balanced
Return loss >21 dB, 0.1 to 6.0 MHz
Input level 2 to 7 Vpp nominal, min. 500 mV
Sample rate 32 kHz, 44.1 kHz and 48 kHz
Embedded Audio
Format SMPTE 272M
Sample frequency 48 kHz (locked to video)
Resolution 20 bits
VBI Data Processing
Standard VBI processing
Closed captions on Composite and SDI EIA 708; DVS 157; SA Type 4
ClearSight and SDI VBI
VBI formats DVB VBI Formats:
Teletext B, VPS, WSS, WSS-AFD, Transparent lines: Up to four lines per field
(DVB and SA formats).
SCTE 127 formats:
NABTS, AMOL, TV Guide, VITC
Other signals supported :
Closed captions.
Embedded in SDI DVB VBI Formats:
Sampled VBI (Teletext, VPS, WSS, WSS-AFD), Transparent lines: Up to four
lines per field (DVB and SA formats).
SCTE 127 formats:
NABTS, AMOL I&II (Nielsen), TV Guide, VITC
Other signals supported:
EDH, VII, Closed captions
Frame Synchronizer
Reference input BNC 75 Ω. Black and burst
Control Internal or external reference, bypass
Video and Audio Processing
Video
Encoding MPEG-2 MP@ML or 4:2:2P@ ML (option)
Encoding control Adaptive coding parameters and GOP controlled by pre-analysis
Chroma format 4:2:0 or 4:2:2 (option)
Systems 625/25 Hz and 525/29.97 Hz
Encoding rate 0.5 to 15 Mbit/s for 4:2:0, 1.5 to 50 Mbit/s for 4:2:2
Modes CBR, VBR (only for 4:2:0). Statistical multiplexing (4:2:0) (option: either IP-
based, or Regulus-based).
H Resolutions 352, 480, 528, 544, 640, 704 and 720
V Resolutions 576 (for 625/25) and 480 (for 525/29.97)
Page 4 of 7
5. Data Sheet
Feature Description
Video Pre-processing
PreSightPlus filter suite Adaptive spatio-temporal filtering with motion-compensation (option) controlled
by pre-analysis
PreSightPlus pre-analysis Complexity and scene-change analysis with look-ahead
Audio
Encoding MPEG-1 Layer II or Dolby Digital (AC-3)
Sample rates 32 kHz, 44.1 kHz and 48 kHz (pass-through only 48 kHz)
Layer II encoding modes Stereo, Joint Stereo, Dual Channel, Single Mono, VPS Auto
Up to eight different PIDs
Layer II encoding rate 32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 and 384 kbit/s
Dolby Digital (AC3) encoding modes 1/0 Center, 2/0 Stereo, 1+1 Dual Mono for professional applications
Dolby Digital (AC3) encoding rates 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, 448, 512, 576 and 640
kbit/s
Dolby Digital (AC3) pass through bit rates 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384, 448, 512, 576 and 640
kbit/s
Transport Output
DVB-ASI Output
Number of outputs Two + 1 monitor output (monitor cannot be muted)
Connector BNC
Impedance 75 Ω
Return loss ≥15 dB, 27 to 270 MHz
TS rate 1 to 64 Mbit/s
TS packet length 188 bytes, 204 RS On, 204 RS Off
ASI bit rate 270 Mbit/ s ± 100 ppm
Output level 800 mVpp nominal
IP TS Output
Number of outputs 2
Type Eight-pin RJ-45, MDI
Ethernet Type 100 Base-T
Format UDP/IP, RTP/UDP/IP
IP address format Multicast, unicast
TS bit rate Follows the ASI output rate
TS packet length 188 bytes, 204 RS On, 204 RS Off
2
Scrambling
BISS-E EBU Tech. 3292 rev.2 August 2002
Modes BISS 1 (Session Word)
BISS-E (Clear Session Word)
BISS-E (Injected ID and encrypted Session Word)
Transport stream output being scrambled ASI
Monitor and Control
Management interface Ethernet 10/100 Base-T on RJ-45
Protocol SNMP or Web
Front panel LCD character display with menu and input keys
Alarm relays Three contact sets on 9-pin sub-D female
2
BISS-E Scrambling is only possible with baseboard H/W P/N: 4013809
Page 5 of 7
6. Data Sheet
Feature Description
Statmux interface 1) IP-based Statmux:
• Either IP TS Output port or management port
2) Regulus-based Statmux:
• RS-232 on 9-pin sub-D female
Environmental
Operation temperature range 0 to +50°C (32 to 122°F)
Storage temperature range -20 to +70°C (-4 to 158°F). (-40°C/-40°F can be obtained for a limited period,
max. 20 hours due to the display).
Relative humidity +50°C/122°F 95% Relative Humidity, IEC 60068-2-78 test: Cab
Altitude 70 to 106 kPa. ETS 300 019 part 1-3 stationary use, Class 3.2 and thus
EN/IEC 60068-2-13, test M
Dimensions (W x H x D) 482 x 44.5 x 480 mm (19 x 1.75 x 18.9 inches)
Weight 7.7 kg / 17 lbs
Cooling Forced cooling with air flow from front to back
Power Requirements
AC Power
Voltage range 100 to 120 or 200 to 240 V AC ±10%
Line frequency 47 to 63 Hz
Consumption ≤ 75 W fully equipped
DC Power
Voltage range -38 to -58 V DC
Consumption ≤ 75 W fully equipped
Figure 2. D9032 Encoder Connector Panel, AC Version
Page 6 of 7
